Polaris Sign - How to Fix the Fabulous Neon Sign?

 

Polaris Sign have been in the Neon Sign industry for more than a decade. Leading by Master Yin, the team continues to develop and expand in dramatic ways. Other than the experimental team which focuses on testing new materials, new techniques and quality control, Polaris Sign has a strong team of product design.

Customer Experience

As Polaris Sign emphases customer experience, the Marketing team has been developing different videos and other ways to engage our customers, fans and fans-to-be. Throughout the communication with our clients, our team found that there is ONE big question shooting to us after receiving the customized Neon Sign from Polaris Sign: How to fix the Fabulous Neon Sign?

In order to fix the Neon Sign, there are several ways: Hanging Strips, Screws (Wooden Board) and Standoffs (Wall Mounting). Our team has made three videos to show you step by step, how to fix the Neon Sign.

The Hanging Strips

How to Fix the fabulous Polaris Neon Sign? One of the ways is to use Hanging Strips - to avoid nail holes. What you need here are: the Hanging Strips, marker/pencil, ruler/Level.

Before sticking the sign to the wall, better measure and find the best suitable place. Mark the spots with a marker/pencil. Then, fold the strips with pressure. Press two strips together until they click.

Next, remove the liner of one side of the strips. Stick the strips on the wall or at the back of the sign. Remember to leave the round end close the the edge of the sign or even a bit out (In case of easier removal).

Then, remove the liner on the other side of the strips and fix the sign on the wall according to the marks with pressure for around 30 secs.

Now, everything is ready! Plug the power and light on! You can also test if the sign is well-placed.

 

 

The Screws (Wooden Board)

If you want to fix the Neon Sign on wooden materials, you can use this method.

What you need here are a drill, screws, marker/pencil, ruler/Level, gloves.

Before sticking the sign to the wall, better measure and find the best suitable place. Mark the spots with a marker/pencil. Then, apply the screws and use the driller. Make sure you are wearing a gloves and is drilling perpendicularly to the wall.

After drilling the first one, go for the diagonal to make sure it stays on the wall. Next, finish the other two corners and other marked places to fix the neon sign.

Finally, connect the wires and switch on the NEON SIGN.

 

 

The Standoffs (Wall Mounting)

To fix the Neon Sign on the wall, it is better using the standoffs. What you need here are a hammer drill, screwdriver, hammer, standoffs, alligator anchors, marker/pencil, ruler/level, gloves.

First, measure with a level and find the best suitable place. Then, mark the holes with a marker/pencil.

Second, drill the holes on the wall perpendicularly.

Third, apply the alligator anchors by using the hammer.

Forth, put the screw through the cylinder and fix it to the alligator anchor by a screwdriver. Apply to all 4 holes.

Fifth, close the cap of the cylinders and go for the diagonal and then for the rest.

Finally, connect the wires and switch on the NEON SIGN.

 

 

NEED HELP?

Polaris Sign aims at creating the best customer experiences not only on the high quality products but also our communication and after services. Whenever you experience any problems with our products, you should not hesitate to reach us by Whatsapp, email or on our social media channels.

Polaris Sign Whatsapp QR Code
Polaris Sign Lo